Description

DESIGN: Front opening, equipped for installation in either
freestanding or undercounter-type operations.
CONSTRUCTION: 300 series stainless steel tank, door
and top panel.
PUMP: Centrifugal-type, integral with motor, horizontally
mounted. Pump capacity 38 gpm.
MOTOR: Single phase, furnished for all electrical specifications. Factory sealed lubrication. Inherent overload
protection with auto reset.
WASH AND RINSE CYCLE: Complete automatic type,
controlled by solid-state electronics. Cycle may be interrupted any time by opening door. Cycle continues when
door is closed.
Initial cycle fills wash tank, to be recirculated each wash
cycle. Some wash water is drained off before rinse
cycle. Rinse cycle refreshes wash water and tank heat.
RINSE PUMP: Powered by a single phase motor, the rinse
pump is made of high strength engineered composite
material.
RINSE AND SANITATION:
LXeH: Sanitation is accomplished by means of a built-in
booster heater designed to raise temperature of water
to a minimum of 180°F from an incoming water temperature of 110°F.
LXeC: Sanitation is accomplished by injection of proper
amount of sodium hypochlorite solution (liquid bleach)
into final rinse water to achieve a minimum of 50PPM
sanitizing solution. Injection of sodium hypochlorite is
accomplished by a built-in sanitizing chemical pump.
PUMPED DRAIN: Machine automatically drains water
through a built-in pump. Maximum 38″ drain height
permitted.
RACKING: Machines accommodate racks from
10″ x 20″ to 20″ x 20″. Also accepts 16″ x 18″ cafeteria
trays.
NOTE: Certain materials, including silver, aluminum and
pewter are attacked by Sodium Hypochlorite solution in
the chemical sanitizing mode of operation.
SPECIFICATIONS: Listed by Underwriters Laboratories
Inc. and NSF International.